Heads and nozzle heads for wet cleaning
Specification
Nozzle WBN head
| The diameter of the nozzle | 6,5 to 9,5 mm |
| Thread | 50 mm (fits standard Clemco luminaires (NHP 1, NHP 2, NHP 3/4) and replacements) |
| Material | Tungsten Carbide |
| Water | The possibility of connecting water from the water supply network |
| Case | Aluminium |
| Ability to work without water | YES |
WBA head for wet cleaning
| The diameter of the nozzle | A standard threaded nozzle can be screwed onto the head 50 mm |
| Thread | 50 mm (fits standard Clemco luminaires (NHP 1, NHP 2, NHP 3/4) and replacements) |
| Venturi tube | YES |
| Water | High pressure water connection required |
| Case | Aluminium |
| Ability to work without water | YES |
The wet cleaning head helps keep dust levels under control. It adds a small amount of water to the abrasive (air) stream. Due to the fact that it is mounted in front of the nozzle, the entire abrasive is wetted before leaving the nozzle. Thanks to the valve on the head, dry cleaning is possible without removing the head.
There are 2 types – with an integrated shot blasting nozzle (WBN nozzle) and without it (WBA head).
